ENGINEERING-GRADE FILAMENT

Filament your production line can trust.

Every spool held to ±0.02 mm, so your printers run the same on spool 1 and spool 1,000.

Request volume pricing Browse materials

Ø 1.75 mm ±0.02 · 2.5 kg / 10 kg spools · vacuum-sealed <10% RH

Stacked filament spools wound in magenta, teal, cobalt and white with precisely parallel strands Ø 1.75 ±0.02 mm SDS · ROHS · REACH

TRUSTED BY PRINT FARMS AND MANUFACTURERS

  • Hexvolt Robotics logoHexvolt Robotics
  • Nordfab Additive logoNordfab Additive
  • Calder Prototyping logoCalder Prototyping
  • Bright Iron Mfg. logoBright Iron Mfg.
  • Asterion Prototyping logoAsterion Prototyping
  • Ridgeline Tooling logoRidgeline Tooling
CATALOG

Our materials

View all materials
MATERIALS

Materials, by application, not by hype.

VANYO extrudes its own filament — PLA, PETG, ASA and TPU off our own lines, sold under our label, under our customers' labels, or wholesale by the carton.

All filaments
  • Magenta PLA filament coil beside a printed calibration cube

    PLA-Pro

    Jigs, fixtures, end-use enclosures

    TENSILE 62 MPa
    PRINT TEMP 205–225 °C
    SPOOLS 2.5 / 10 kg

    8 colors

  • Slate-blue PETG filament coil beside a printed bracket

    PETG

    Functional brackets, fluid-adjacent parts

    TENSILE 53 MPa
    PRINT TEMP 230–250 °C
    SPOOLS 2.5 / 10 kg

    6 colors

  • Signal-red ASA filament coil beside a printed automotive-style clip

    ABS / ASA

    Outdoor housings, automotive clips

    TENSILE 46 MPa
    PRINT TEMP 240–260 °C
    SPOOLS 2.5 / 10 kg

    6 colors

  • Black carbon-fiber nylon coil beside an orange printed structural gussetComing soon

    PA-CF Nylon

    Structural, high-heat, wear parts

    TENSILE 105 MPa
    PRINT TEMP 260–290 °C
    SPOOLS 2.5 kg

    1 color

Quality-control bench with an inline laser micrometer, calipers and moisture analyzer, colorful spool rack behind
QUALITY CONTROL

Precision is a process, not a promise.

TYPICAL QC RESULTS · 1.75 mm

ParameterSpecTypicalResult
DIAMETER 1.75 ±0.02 mm 1.748 mm PASS
OVALITY ≤0.02 mm 0.011 mm PASS
MOISTURE <10% RH sealed 6.2% RH PASS
COLORIMETRY ΔE ≤1.0 ΔE 0.4 PASS

Every material is extruded to a ±0.02 mm diameter tolerance and checked before it ships.

Request an SDS →
BUSINESS ACCOUNTS

Built for purchase orders.

VOLUME TIERS

  • Carton: 20 spools
  • Pallet: 240 spools
  • Contract pricing above 10 pallets

TERMS

  • Net-30 for approved accounts
  • Purchase orders accepted
  • W-9 on file

SUPPLY

  • Standing orders
  • Reserved batches
  • US warehouse stock
Open a business accountPrivate label & OEM production
IN PRODUCTION

On the floor at 40+ print farms.

  • HEXVOLT ROBOTICS

    We track failure rate per spool. Vanyo PETG has held 0.4% across 11 months. Nothing else we ran stayed under 2%.

    Portrait of M. Reyes

    M. Reyes

    Operations manager

  • NORDFAB ADDITIVE

    Diameter drift used to force re-tuning every restock. Twelve Vanyo batches in, our profiles have not changed once.

    Portrait of T. Okafor

    T. Okafor

    Print farm lead

  • CALDER PROTOTYPING

    We switched because the diameter holds. Our QA signs off on incoming material in minutes instead of running our own tests.

    Portrait of R. Calder

    R. Calder

    Quality engineer

Documentation on request

  • ROHS STATEMENT
  • REACH STATEMENT
  • SDS · EVERY MATERIAL
QUESTIONS

Ordering, answered.

What is the minimum order?

One carton of 20 spools per material and color. Pallet and contract tiers unlock lower per-spool pricing.

What are current lead times?

In-stock materials dispatch same day for orders placed before 14:00 PST. Reserved-batch and contract orders ship on the schedule agreed in your account.

Can we get samples before a volume order?

Yes. We send one 1 kg spool per candidate material at carton pricing, credited against your first carton order.

What are the reseller terms?

Resellers order at pallet tier or above, with Net-30 after approval and access to reserved batches. Apply through a business account and mark the reseller option.

How is tolerance measured?

An inline laser gauge reads the strand on two axes continuously during extrusion. If either axis leaves ±0.02 mm the line stops automatically, so out-of-spec material is caught on the line rather than found in a spool. That same two-axis reading is where our filament ovality figure comes from. Moisture at sealing and color against an approved reference are checked on the same line, and every batch is test-printed to confirm it feeds and prints cleanly. That last check is a step on the line rather than a document — we do not issue certificates of analysis or per-batch test reports.

Do you produce filament under our own brand?

Yes — own-brand spools, labels, boxes and colors, produced on the same lines as our catalog. See private label and OEM filament manufacturing for what can be customized and how a run is quoted.

How should we evaluate a filament manufacturer?

Ask for every specification with a measurement method attached, test a production sample on your own machines, and ask for documentation as files rather than as claims. We wrote the whole list down: how to choose a 3D printer filament manufacturer — 22 criteria, a scoring checklist, the warning signs, and how we answer each one, including the criteria we do not currently meet.

Why do printed parts split along the layer lines?

Layer splitting is almost always moisture, nozzle temperature, part cooling or under-extrusion rather than the material's brand. Dry filament, a verified diameter and consistent flow remove the material's share of it. The full cause-by-cause breakdown — and the order to fix them in — is in our guide to 3D printing layer adhesion problems.